Condensate Units

A small Low Price condensate unit for pumping water temperatures up 200°F. A standard 3/16" thick, black steel receiver is provided for years of service. Units are floor-mounted style and designed for up to 20,000 square foot EDR and discharge pressures up to 40 psig. Units are available in either simplex or duplex configurations with 3500 RPM, single-phase motors. Pumps typically equipped mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A small Economical Condensate unit for pumping water temperatures up 200°F. A standard cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for up to 20,000 square foot EDR and discharge pressures up to 40 psig. Units are available in either simplex or duplex configurations with 3500 RPM, single-phase motors. Pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A small Economical Condensate Pump unit for pumping water temperatures up 210°F with low NPSH pump requirements. A stainless steel, axial flow impeller (often referred to as a propeller or inducer) directs the suction flow of condensate into the eye of the impeller to minimize pump cavitations. A cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for up to 12,000 square foot EDR and discharge pressures up to 20 psig. Units are available in either simplex or duplex configurations with 3500 RPM, single-phase motors. Pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Low Price Customized condensate unit for pumping water temperatures up 200°F. A standard 3/16" thick, black steel receiver is provided for years of service. Units are floor-mounted style and designed for up to 20,000 square foot EDR and discharge pressures up to 40 psig. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors are 3500 RPM, single or three phase. Pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

An Economical Customized Condensate unit for pumping water temperatures up 200°F. A standard close-grained cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for up to 20,000 square foot EDR and discharge pressures up to 40 psig. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors are 3500 RPM, single or three phase. Pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Durable condensate unit with Cast iron receiver for pumping water temperatures up 200°F. A standard cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for capacities from 1,000 to 100,000 sq. ft. EDR with tank sizes ranging from 10 gallons up to 500 gallons. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors can be either 1750 RPM or 3500 RPM, single or three phase. Pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Type DEC is simply an elevated DC.

Go to top • Glossary

A durable condensate unit with steel receiver for pumping water temperatures up 200°F. A standard 3/16" thick black steel receiver is provided for years of service. Units are floor-mounted style and designed for capacities ranging from 1,000 to 100,000 sq. ft. EDR with tank sizes ranging from 15 gallons up to 235 gallons. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors can be either 1750 RPM or 3500 RPM, single or three phase. Pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Type DES is simply an elevated DS.

Go to top • Glossary

A Propeller Condensate unit for pumping water temperatures up 210°F. A standard, close-grained cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for capacities from 6,000 to 112,000 sq. ft. EDR with tank sizes ranging from 10 gallons up to 500 gallons. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors are 3500 RPM, single or three phase. Unit equipped with bronze-fitted with Model "P" that has low NPSH requirements. Pumps equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Model "P" pumps with low NPSH requirements are bronze fitted to resist corrosion and prevent seizing; pump also equipped with mechanical seals rated for temperatures up to 250°F.

Go to top • Glossary

A Propeller Elevated Condensate unit for pumping water temperatures up 212°F. A standard, close-grained cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are elevated style and designed for capacities from 6,000 to 112,000 sq. ft. EDR with tank sizes ranging from 10 gallons up to 500 gallons. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors are 3500 RPM, single or three phase. Unit equipped with bronze-fitted with Model "P" that has low NPSH requirements. Pumps equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Propeller condensate unit with Steel receiver for pumping water temperatures up 210°F. A standard, 3/16" thick black steel receiver is provided for years of service; receiver can be stainless steel if required. Units are floor-mounted style and designed for capacities from 6,000 to 112,000 sq. ft. EDR with tank sizes ranging from 15 gallons up to 235 gallons. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors can be either 1750 RPM or 3500 RPM, single or three phase. Unit equipped with bronze-fitted Model "P" pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Propeller Elevated condensate unit with Steel receiver for pumping water temperatures up 212°F. A 3/16" thick standard, black steel receiver is provided for years of service. Units are elevated style and designed for capacities from 6,000 to 112,000 sq. ft. EDR with tank sizes ranging from 15 gallons up to 235 gallons. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors can be either 1750 RPM or 3500 RPM, single or three phase. Unit equipped with bronze-fitted Model "P" pumps typically fitted with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Cylindrical Steel Condensate unit for holding a large volume of water and pumping water temperatures up 200°F (with Model D pump) and temperatures up to 210°F (with Model P pump). A standard black steel receiver is built with flat heads and thickness ranging from 3/16" to 3/8" for years of service; an option for heavier thickness is available. Receiver also can be 300 series stainless steel for maximum corrosion resistance; most receiver sizes can be epoxy-lined or plasite-lined. Units are floor-mounted for low-piped gravity returns and with tank sizes ranging from 70 gallons to 1488 gallons; custom-sized tanks can be made for unique applications. Unit can handle a wide range of flows and pressures.

Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors can be either 1750 RPM or 3500 RPM, single or three phase. Unit equipped with bronze-fitted Model "D" or "P" pumps typically fitted with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Cylindrical Steel Elevated Condensate unit for holding a large volume of water and pumping water temperatures up 210°F (with Model D pump) and temperatures up 212°F (with Model P pump). A standard black steel receiver is built with flat heads and thickness ranging from 3/16" to 3/8" for years of service; an option for heavier thickness is available. Receiver also can be 300 series stainless steel for maximum corrosion resistance; most receiver sizes can be epoxy-lined or plasite-lined. Units are elevated on a fabricated steel base with tank sizes ranging from 77 gallons to 1578 gallons; custom-sized tanks can be made for unique applications. Unit can handle a wide range of flows and pressures.

Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors can be either 1750 RPM or 3500 RPM, single or three phase. Unit equipped with bronze-fitted Model "D" or "P" pumps typically fitted with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Steel Horizontal Condensate unit for holding a large volume of water and pumping water temperatures up 200°F (with Model D pump) and temperatures up to 210°F (with Model P pump). A standard black steel receiver is ASME code constructed with dished heads; tank can be ASME code stamped if needed. Material thickness ranges from 3/16" to 3/8" for years of service; an option for heavier thickness is available. Receiver also can be 300 series stainless steel for maximum corrosion resistance; most receiver sizes can be epoxy-lined or plasite-lined. Units are floor-mounted for low-piped gravity returns and with tank sizes ranging from 77 gallons to 1578 gallons; custom-sized tanks can be made for unique applications. Unit can handle a wide range of flows and pressures.

Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors can be either 1750 RPM or 3500 RPM, single or three phase. Unit equipped with bronze-fitted Model "D" or "P" pumps typically fitted with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Steel Horizontal Elevated Condensate unit for holding a large volume of water and pumping water temperatures up 210°F (with Model D pump) and temperatures up to 212°F (with Model P pump). A standard black steel receiver is ASME code constructed with dished heads; tank can be ASME code stamped if needed. Material thickness ranges from 3/16" to 3/8" for years of service; an option for heavier thickness is available. Receiver also can be 300 series stainless steel for maximum corrosion resistance; most receiver sizes can be epoxy-lined or plasite-lined. Units are elevated on a fabricated steel base with tank sizes ranging from 77 gallons to 1560 gallons; custom-sized tanks can be made for unique applications. Unit can handle a wide range of flows and pressures.

Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors can be either 1750 RPM or 3500 RPM, single or three phase. Unit equipped with bronze-fitted Model "D" or "P" pumps typically fitted with industry standard motors and with mechanical seals rated for temperatures up to 250"F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Durable Underground Condensate unit uses a patented design to pump water in applications where the return piping is at or below floor level. The underground basin is made of stainless steel in various sizes. Pumps are close-coupled, bronze fitted with industry standard motors. Pumps are located above the basin cover plate allowing for easy maintenance with disturbing the cover plate. The propeller shaft and it high temperature patented (U.S. Patent #4,932,846) bearing design is more durable and simpler than most other designs.

Units available in either simplex or duplex configurations with a variety of options including thermometer, control panel; motors are 3500 RPM, single or three phase. Unit equipped with bronze-fitted Model "U" pumps fitted with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A high temperature return unit designed for pumping water temperatures up 300°F. Unit reduces flash steam losses and conserves energy by eliminating the need for cooler, traps, and flash tanks in a steam system. Operating costs are lower since condensate does not need to be reheated as much as in a vented system. A standard black steel receiver with dished heads is ASME code-stamped for 125 psig. Unit can handle a wide range of flows and pressures. Units are elevated style and designed for capacities from 2,500 to 40,000 lbs per hour with tank sizes ranging from 66 gallons up to 190 gallons; however custom-sized tanks can be made for applications outside the standard tank dimensions.

Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors are 3500 RPM, single or three phase. Unit equipped with bronze-fitted, two-foot, NPSH Model "P" pumps typically fitted with industry standard motor and with mechanical seals rated for temperatures up to 300°F. Higher temperature seals and special faces available upon request.

A HT-PMV unit is equipped with a proportioning motorized value (PMV). This valve is located in the discharge piping; it balances the water discharged by the continuously running pumps with the returning condensate input to the tank in order to maintain a constant water level in the tank. The valve closes when the water level in tank is low to prevent high pressure in unit from blowing through the pumps. A HT-PMV is ideal for use on a Steam Absorption Chiller because it improves the efficiency of the absorber by eliminating need for the trap.

Go to top • Glossary

A Forced Liquid Operated Transfer (FLOT), also know as a motive powered pump is designed to transfer high temperature water (over 250°F) in applications where no electricity is available. Also used in environments that are potentially explosive or hazardous and environments that are wet or extremely humid that would require use of special motors.

The motive powered pump uses a pressurized gas up to 125 psig, such as steam, or compressed air as the motive force for pumping water temperatures up 300°F. Receiver material can be either black steel receiver ASME code-stamped for 150 psig or ductile iron. Motive powered pumps units are available in either simplex or duplex configurations with a variety of options including gauge glass, cycle counter assembly, and insulation.

A "packaged" motive powered pump (PK/FLOT) unit combines the motive powered pump (either steel or ductile iron) with a receiver that is typically elevated above the motive powered pump on a fabricated steel frame. The receiver can be either an atmospheric tank that is 3/16" black steel or a pressured tank that is ASME code-stamped for 150 psig.

Go to top • Glossary

A Pressure Powered High Temperature pump designed to transfer high temperature water up to 338°F in applications where no electricity is available. Also used in environments that are potentially explosive or hazardous and environments that are wet or extremely humid that would require use of special motors.

Tanks are black steel receivers ASME code-stamped for 150 psig. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, cycle counter assembly, and insulation.

Go to top • Glossary