Condensate Units

A small Economical Condensate unit for pumping water temperatures up 200°F. A standard cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for up to 20,000 square foot EDR and discharge pressures up to 40 psig. Units are available in either simplex or duplex configurations with 3500 RPM, single-phase motors. Pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A small Economical Condensate Pump unit for pumping water temperatures up 210°F with low NPSH pump requirements. A stainless steel, axial flow impeller (often referred to as a propeller or inducer) directs the suction flow of condensate into the eye of the impeller to minimize pump cavitations. A cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for up to 12,000 square foot EDR and discharge pressures up to 20 psig. Units are available in either simplex or duplex configurations with 3500 RPM, single-phase motors. Pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

An Economical Customized Condensate unit for pumping water temperatures up 200°F. A standard close-grained cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for up to 20,000 square foot EDR and discharge pressures up to 40 psig. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors are 3500 RPM, single or three phase. Pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Durable condensate unit with Cast iron receiver for pumping water temperatures up 200°F. A standard cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for capacities from 1,000 to 100,000 sq. ft. EDR with tank sizes ranging from 10 gallons up to 500 gallons. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors can be either 1750 RPM or 3500 RPM, single or three phase. Pumps typically equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Type DEC is simply an elevated DC.

Go to top • Glossary

A Propeller Condensate unit for pumping water temperatures up 210°F. A standard, close-grained cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are floor-mounted style and designed for capacities from 6,000 to 112,000 sq. ft. EDR with tank sizes ranging from 10 gallons up to 500 gallons. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors are 3500 RPM, single or three phase. Unit equipped with bronze-fitted with Model "P" that has low NPSH requirements. Pumps equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Model "P" pumps with low NPSH requirements are bronze fitted to resist corrosion and prevent seizing; pump also equipped with mechanical seals rated for temperatures up to 250°F.

Go to top • Glossary

A Propeller Elevated Condensate unit for pumping water temperatures up 212°F. A standard, close-grained cast iron receiver is provided with a standard 20-year warranty against corrosion failure for years of service. Units are elevated style and designed for capacities from 6,000 to 112,000 sq. ft. EDR with tank sizes ranging from 10 gallons up to 500 gallons. Units are available in either simplex or duplex configurations with a variety of options including gauge glass, thermometer, control panel; motors are 3500 RPM, single or three phase. Unit equipped with bronze-fitted with Model "P" that has low NPSH requirements. Pumps equipped with industry standard motors and with mechanical seals rated for temperatures up to 250°F. Higher temperature seals and special faces available upon request.

Go to top • Glossary

A Forced Liquid Operated Transfer (FLOT), also know as a motive powered pump is designed to transfer high temperature water (over 250°F) in applications where no electricity is available. Also used in environments that are potentially explosive or hazardous and environments that are wet or extremely humid that would require use of special motors.

The motive powered pump uses a pressurized gas up to 125 psig, such as steam, or compressed air as the motive force for pumping water temperatures up 300°F. Receiver material can be either black steel receiver ASME code-stamped for 150 psig or ductile iron. Motive powered pumps units are available in either simplex or duplex configurations with a variety of options including gauge glass, cycle counter assembly, and insulation.

A "packaged" motive powered pump (PK/FLOT) unit combines the motive powered pump (either steel or ductile iron) with a receiver that is typically elevated above the motive powered pump on a fabricated steel frame. The receiver can be either an atmospheric tank that is 3/16" black steel or a pressured tank that is ASME code-stamped for 150 psig.

Go to top • Glossary